Typical Uses
Recommended for broad wall & ceilings & areas in lounge rooms, dining areas, bedrooms, & passages.
QA Wall & Ceiling
$40.00 – $120.00
A high opacity, non-yellowing, acrylic flat paint. Its lack of sheen aids in covering minor surface imperfections.
Colours
Colours from any recognised paint company can be mixed. QA Coatings colour range is available at our factory outlet.
Properties
Colour : complete colour range available
Gloss Level : low gloss
Durability : good for interior use or in protected areas externally
Solvent resistance : sensitive to aromatic hydrocarbons & alcohols
Toxicity : non toxic , lead & mercury free
Theoretical spreading rate at recommended dry film build – assumes no losses. Two coats are recommended each with a spreading rate of 16m² per litre at recommended 22 micrometres dry film build corresponding to an overall rate of 8m² per litre at 44 micrometres dry film build. Spreading rate will vary depending on such factors as nature of surface application method & application conditions.
Theoretical volume solids 35%
Surface preparation
Surfaces to be painted should be dry & free from dust, grease & dirt. Remove flaking & powdering paint & repair surface imperfections with a suitable filler.
Application
Stir well & apply liberally straight from the can. This paint has been specially formulated for rolling but may also be applied by brush or spray. Use a short nape roller. Avoid excessive brushing or rolling back into paint which has been drying for some minutes. Dampen very porous, dry surfaces & add 100ml water per litre to the first coat only.
Drying time Touch -dry in 30 minutes. Recoat after two hours. In damp & humid conditions drying time is lengthened
Equipment clean up Water