QA Sealer Undercoat
A Premium Sealer Undercoat for all unprimed surfaces prior to Flat, Low Sheen, Satin & Glass Top Coats.
Applications
Recommended for interior walls & ceilings & areas in kitchens, bathrooms, family rooms, bedrooms etc. Being a pure acrylic it is also suitable for external applications.
Properties
Colour : white (with colours available on request)
Gloss Level : low gloss
Durability : good for interior or exterior use
Solvent resistance : sensitive to aromatic hydrocarbons & alcohols
Toxicity : non -toxic, lead & mercury free
Theoretical spreading rate at recommended dry film build Assumes no losses. One coat is recommended with a spreading rate of 14m² per litre. Spreading rate will vary depending on such factors as nature of surface application method & application conditions.
Theoretical volume solids 35%
Drying time
Touch- dry in 30 minutes. Recoat after two hours. In damp & humid conditions drying time is lengthened
Surface preparation
Surfaces to be painted should be dry & free from dust, grease & dirt. Remove flaking & powdering paint & repair surface imperfections with suitable filler.
Application
Stir well & apply liberally straight from the can. This paint has been specially formulated for rolling but may also be applied by brush or spray. Use a short nap roller. Avoid excessive brushing or rolling back into paint which has been drying for some minutes.
Equipment clean up Water
Packaging 10tr & 20ltr pails